| Parameter : | |
|---|---|
| Shaft Dia | : 25mm to 150mm |
| Pressure | : Full Vacuum to 6 bar |
| Temperature | : -30°C to 140°C |
| Speed | : 900 RPM |
Seal Ring Faces : Carbon and SiC
Seat Faces : SiC and TC
Elastomer : Viton, TTV, FEP and FFKM
MOC : SS 316 - CHANGE OF MOC ON REQUEST
Single Dry Running Agitator/Reactor seal
In mixing technology, the sealing of a rotating agitator shaft in the passage through a vessel wall represents the principal sealing task. Different sealing principles are used depending on operating conditions such as pressure, temperature, and speed. Most mechanical seals of agitators consist of gland plate with Mating ring and sleeve with seal ring and elastomeres for leakage prevention. They are usually top,bottom and side mounted on the vessel.
Dry Running Agitator Seals are designed for Top, Bottom and Side Entry Drives in Agitators, Mixers OR Blenders in case when Non-Aggressive and Non-Hazardous Media are sealed with the use of Cooling Liquid Preventing against Dry Running. Construction of MOC designed of these Seals purpose of holding whole Rotary Parts together with the help of Snap Rings which make easy for Installation and Removal.
Dry Running Agitator Seals (Type RT-D80)
- Balance Pusher Seals.
- Dry Run Seals are excellent in High Speed Seals for Operation in Vacuum Conditions.
- Without Bearing OR with Integral Bearing.
- Multiple Spring externally Mounted Seal with 'O' Ring as Secondary Sealing member.
- Various Elastomers can be offered for various media application
