Agitator / Reactor Mechanical Seal

Double Balance/Unbalance Liquid Lubricated Agitator/Reactor Seal

In mixing technology, the sealing of a rotating agitator shaft in the passage through a vessel wall represents the principal sealing task. Different sealing principles are used depending on operating conditions such as pressure, temperature, and speed. Most mechanical seals of agitators consist of gland plate with Mating ring and sleeve with seal ring and elastomeres for leakage prevention. They are usually top,bottom and side mounted on the vessel.

Double Agitator Mechanical Seals are designed for Top, Side and Bottom Entry Drives in Agitators and Reactors with balance and unbalance configuration. Compact Economical Cartridge Double Mechanical Seal for Agitators and Reactors. Seal Design Incorporate with location of Bearings very close to the Seal. These Seal specially designed for any mixed and pressurized liquid in Vessel with Top Entry Agitators where no leakage in Process Gas OR Fluids to the Environment can be tolerated. Complete Pre-assembled Tested Unit ready for installation. These Seal are used for Exclusive Solid Seal Faces, Stationary Seats, thus Lowest Level of Seal Face distortion when Expose to Compressive Load and Thermal Pressure.

Double Agitator/Reactor Mechanical Seals
(Type RT-83/83B)

• Balance Pusher Seals.
• Dry Run Seals are excellent in High Speed Seals for Operation in Vacuum Conditions.
• Without Bearing OR with Integral Bearing.
• Multiple Spring externally Mounted Seal with 'O' Ring as Secondary Sealing member.
• Various Elastomers can be offered for various media application

Single Dry Running Agitator/Reactor seal

Single Balance/Unbalance liquid lubricated Agitator/Reactor seal

Double Balance/Unbalance Gas lubricated Agitator/Reactor seal