Double Cartridge Balance Mechanical Seals
A Cartridge seal is a design with complete installation on site with no requirement of trchnical experts . A cartridge seal design should be used whenever possible to ensure proper seal assembly and optimum mechanical seal MTBFs. The use of cartridge mechanical seals significantly minimizes installation errors.
Double Cartridge balance Seal are Recommended for Clean and dirty media application . Seal can tolerate reversal pressure. Double Cartridge balance Seal is Standard for using where Corrosive Liquid are being Processed. We are the top manufacturer of Double Cartridge Seal Type ZR600/D in mumbai, INDIA This Type of Seals is designed for using for Petroleum Products, Low Aggressive Chemicals and Refrigerants in Centrifugal pumps and other Equipment with Rotating Shafts.
Double Cartridge Mechanical Seals
(Type RT-S63)
- Balance pusher seals.
- Single and dual configuration.
- Dual directional.
- Mechanical seal drive to reduce slippage on shaft or sleeve.
- Heavy duty seal faces remain flat during operation to minimize leakage.
Parameter : |
Shaft Dia |
: 10mm to 100mm |
Pressure |
: Up to 35 bar |
Temperature |
: -30°C to 260°C |
Speed |
: 3000 RPM |
Seal Ring Faces : Cabon, TC and SiC
Seat Faces : SiC and TC
Elastomer : Viton, PTFE, and FFKM
MOC : SS 316, HAST-C Alloy - 20
Related Products