Parameter : | |
---|---|
Shaft Dia | : 10mm to 100mm |
Pressure | : Up to 35 bar |
Temperature | : -30°C to 260°C |
Speed | : 3000 RPM |
Seal Ring Faces : Carbon, TC and SiC
Seat Faces : SiC and TC
Elastomer : Viton, PTFE, and FFKM
MOC :SS 316, HAST-C Alloy - 20
A Cartridge seal is a design with complete installation on site with no requirement of trchnical experts . A cartridge seal design should be used whenever possible to ensure proper seal assembly and optimum mechanical seal MTBFs. The use of cartridge mechanical seals significantly minimizes installation errors.
Single Cartridge Balance seal are Recommended for Clean media application. This seal is Standard for using where Corrosive Liquid are being Processed. Construction of these Seal designs holds whole Rotary Parts together with the help of Snap Rings which is make easiest for Installation and Removal. This Type of Seals is designed for using for Petroleum Products, Low Aggressive Chemicals and Refrigerants in Centrifugal pumps and other Equipment with Rotating Shafts.
Parameter : | |
---|---|
Shaft Dia | : 10mm to 100mm |
Pressure | : Up to 35 bar |
Temperature | : -30°C to 260°C |
Speed | : 3000 RPM |
Seal Ring Faces : Carbon, TC and SiC
Seat Faces : SiC and TC
Elastomer : Viton, PTFE, and FFKM
MOC :SS 316, HAST-C Alloy - 20