| Parameter : | |
|---|---|
| Shaft Dia | : 10mm to 100mm |
| Pressure | : Up to 35 bar |
| Temperature | : -30°C to 260°C |
| Speed | : 3000 RPM |
Seal Ring Faces : Cabon, TC and SiC
Seat Faces : SiC and TC
Elastomer : Viton, PTFE, and FFKM
MOC : SS 316, HAST-C Alloy - 20
Double Cartridge Unbalance Mechanical Seals
A Cartridge seal is a design with complete installation on site with no requirement of trchnical experts . A cartridge seal design should be used whenever possible to ensure proper seal assembly and optimum mechanical seal MTBFs. The use of cartridge mechanical seals significantly minimizes installation errors.
This seals double acting cartridge mechanical seals having integral sleeve and gland plate. These multi spring design seal are pre-assembled, which could be directly installed without any dimensional adjustment during installation. These seals are unbalanced, independent of direction of rotation.
Double Cartridge Unbalance Mechanical Seals
(Type RT-S64)
- Double seal, Cartridge unit
- Inside Mounted, Unbalanced
- Easy Installation, Field repairable
- Interchangeable mating rings & seal ring
